Historical Crossbow Amis

Historical Crossbow Amis

This crossbow is fully functional.

• 82cm total length
• 71cm length tiller (stock) 
• 6,3x5cm tiller profile at the lathe (prod)
• 5,4*2.2cm tiller profile at the end
• 65.5cm width of the lathe
• the steel stirrup is 12cm wide and 10cm high
• the trigger is hand-forged from a prism of 7x7mm
• the tiller (stock) is made from lime tree and has of  dark brown colour
• the rotary nut (catch) is made of steel and has a diameter of 4cm and a width of 2.4cm
• the draw length is approx. 150mm (5,9")
• the lathe (prod) is made of fibreglass (not steel)
• the string is always constructed according to the selected draw weight. It concist of 30-40 Dacron strands 
• The lathe is 65.5cm long
• Recommended arrow length 30cm
• Available draw weight 120 and 150 pounds
• Weight 1960 g
• Made in Czech Republic

Please do not shoot from the crossbow without an arrow. This way you can damage the bowstring!

Please read how to replace a crossbow string.

Operation instructions

This crossbow is not a toy, you can cause with it serious injury. Read carefully these instructions!

1. Check the crossbow before each use (bow, string, trigger, ...). Shoot only if it is completely flawless.
2. Use only bolts supplied with the crossbow or those recommended by the manufacturer. The bolts  (arrows) must not be damaged anyhow as well.
3. Newer dry shoot (without arrows)! You can damage the prod or the string and incur an injury doing so.
4. After drawing the crossbow, secure the trigger against unwanted shooting. Remove the safety chock shortly before intended shooting.
5. Please never aim at people or animals. Be especially careful if small children or pets are present.
6. Shoot at enough strong targets. Put the targets in front of a suitable background (slope, high wall, etc.). Bounced arrows can cause damage or injury as well!
7. If you do not use the crossbow for a longer time or it is exposed to adverse conditions (e.g. high temperature in a parked car on a sunny day), remove the string from the bow.
8. Treat the string with a suitable lubricant or wax to extend its life span.
9. Deal with the crossbow carefully. Do not throw with it and do not put on it any heavy things.
10. The use of this historical crossbow is at your own risk.

Maintenance of the crossbow

The crossbow requires no special care. The most stressed part is the string. It is recommended to wax it before each use - to extend its lifespan. If even one strand of the string is damaged or torn, do no shoot any longer and replace it with new one.

If your crossbow gets wet (in the rain), wipe it with a cotton cloth slightly and let it slowly (not at the radiator) dry. Then oil the metal parts with WD40 e.g. The tiller is treated with varnish from pressed linseed oil. It is possible to renew the coating after some time, but it is not necessary or even not desirable. The crossbow finish (surfaces) get with time and use so called patina, which is firstly visually beautiful and secondly gives the crossbow a historical look.