Outfit4events Weapons Swords and historical sword replicas Swords for Historical Fencing One-and-a-half sword Witter, class B

One-and-a-half sword Witter, class B

Name: One-and-a-half sword Witter, class B
Brand: Kovex Ars
Price: 294 EUR
Availability: OutOfStock
Rating: 4.75 (2 reviews)

next 1

This weapon is counted to gothic-style swords with cutting and stabbing blades. With its narrow blade it fitted perfectly to cavalry soldiers. The cross of the sword is also forged. Forged and hardened blade (52 – 54 Rockwell). More information...

€294,00

€294,00 excl. VAT

On order, order now and goods will be dispatched on: 4-Feb-2025

SKU: mo_3549

Period:

Period: Gothic style, the Middle Ages / Medieval weapons

One-and-a-half sword Witter, 15th century

Sword class B

Forged and ground blade of spring steel CSN 14260 (DIN 1.7103)
Blade hardness 52-54 HRC
Overall length approx. 1239mm
Blade length approx. 941mm
Length of the guard approx. 233mm
Width of the blade at the guard approx. 30mm
Overall weight approx. 1598 g (blunt blade)

Specifications vary from piece to piece; all stated data are to be understood as approximate. The blade is made out of hardened and tempered high carbon spring steel that is not stainless. The guard and pommel is made of steel.

The practical | battle-ready version of this sword has a blunt edge (2-3mm) and rounded point. Such sword was designed to be drawn in a battle or in a stage combat show.

Please note we cannot accept any responsibility for injury, damage or loss incurred by use of any of our sword. You use the sword entirely at your own risk! Even an unsharpened sword can cause serious injury and if precaution is not used easily break bone. Swords are not toys! Improper use and handling of accord may result in serious injuries or death to yourself or bystanders. Please keep your sword out of reach of children!

In fighting with sword on sword, the opponent’s blade should be parried with the side of the blade. Lead your sword sporty right and without excessive and/or unnecessary strength.

Compliance to local, state and federal laws and/or statutes is the responsibility of the purchaser.

Despite the high conscientiousness in the production and material selection, we cannot provide any warranty for breakage of the blade even at proper use. Any sword blade can be broken under certain circumstances. An absolute warranty cannot be provided by any respectable maker.

We warranty our swords against all manufacturer's defects (workmanship and or materials) for a period of two years. This warranty applies only when the product is used under normal conditions for which the sword is designed, and does not apply to damage related to accident, misuse, improper care, negligence, and abnormal and/or excessive wear and tear.

Possible nicks in the blade edge are natural symptom of wear and tear and cannot be reclaimed. When they turn up, please remove all sharp nicks by use of diamond file, abrasive paper or grinding machine.

Loosening of a cross | guard cannot be in many cases avoided as well. It can be fixed by additional riveting or tightening the screw joint. Winding a fishing line around the blade tang into the gap between the grip and guard prove as helpful as well to many swordmen, when trying to fasten a loosened guard.

Please read our: Directions for the use of bladed weapons.

Submit your review

I bought the blunt version of this sword for use in HEMA. I thought of using it armored combat but I didn't realize when they meant narrow 3cm it really would be narrow. It's hard to describe until you see it in person. It's the same width at the shoulder as my Darkwood sidesword blade. So this feels like a two handed sidesword. Really to be honest it feels like a feder without a schilt. It's excellent, very agile. The pommel is oversized however my other fencers in my HEMA club liked that as it brought the balance point to just before the hilt. I wish the blade was a little wider at the cross guard with a slightly smaller pommel. However the narrow blade and oversized pommel do make this sword very precise in fencing. It's very agile for quick redirects tor snap cuts and quick thrusts around your opponents guard. On the downside its lack of blade presence makes it poor in the bind. I don't mind that. It's due to the blade being narrow and the pommel being too heavy. If you ever had one of those really long 42 inch narrow rapiers for fencing that are a little to flexible it's kind of like that with this sword. It feels a little too hilt heavy so precise strikes and thrust are easy however your opponent will most likely dominate you in the bind and easily push the sword out of the way. The only other improvements I'd like are a rolled tip and thicker edges. Stock edge is 2mm which is okay and does take a beating but will need regular filing and sanding as it is a bit thin. I wish it were 3mm. Overall great sword for HEMA. I don't know how it would be as a sharp as it is very flexible. A little too so but, it's not too flexible. Not as bad as a floppy 42 inch rapier blade but very similar in characteristics. If you want a feder for HEMA without the schilt this sword is a great option.

This sword has a 36" blade, weighs 3.5 pounds, and I can't believe how light it feels. It is definitely made to be swung with two hands, but so fast. It feels lighter than my katana. I wanted something that was quick like the rapier, yet had the length of the great sword, and could cut like the katana. This comes as close as possible to all of that with the emphasis on speed and quckness/recovery. The sword is extremely well-built, no cracks, warps, bends, rattles in the handguard, none of that. It looks - awesome. And I don't use that word often. It is like me - rough, a little bit crude, but gets the job done. This sword is capable of abuse. The blade, while not wide, is still thick enough to cut. I may not be a Witcher, but now I can at least look and swing a blade like one. Thumbs up! Great job guys. I will be getting another soon. David MacLeod