17 cen Italian Rapier

17^th Century Italian Rapier

Please note: This is just an ornamental item, not intended for real use!

• Total length approx. 1135mm
• Blade length incl. ricasso approx. 965mm
• Length of the crossguard in the basket hilt approx. 244mm
• Width of the blade at the basket approx. 19.6mm
• Thickness of the blade at the basket approx. 4.2mm
• The blade edge is not razor-sharp, but is not quite blunt. The striking edge is approx. 1.0mm thick
• Into the blade with diamond cross-section is milled approx. 530mm long and approx. 3mm wide fuller
• Ricasso approx. 75mm long
• Handle length, distance between the guard and pommel approx. 97mm
• Handle including grasping over the pommel approx. 113mm
• The blade tang is riveted at the end into a hollow cylinder of approx. 9mm in length and approx. 12.6mm in diameter
• The basket bars are made of approx. 4mm thick wire
• Width of the blade 10cm off its point approx. 11.9mm
• Thickness of the blade 10cm off its point approx. 3.8mm
• The PoB is located at the transition from the ricasso into the blade, approx. 15mm off the basket
• Weight of rapier approx. 1206 g
• Weight of the sheath approx. 260 g

The specifications may slightly vary from item to item.

A high-quality product made by Windlass Steelcrafts®