Poleaxe Bec de Corbin, French Crow’s Beak

Poleaxe Bec de Corbin, French Crow’s Beak

This impressive piece has a total length of 142cm. Detailed punching, strong hand protection and the medieval style make this piece as beautiful as it is deadly. It was hand-forged by the master smiths at Windlass Steelcrafts.

• Total length approx. 1418mm
• Length of the upper metal part about 665mm
• The metal rondel is located about 680mm off the tip
• The main spike / tip is about 215mm long
• The front beak is about 190mm long
• The rear hammer is about 87mm long (up to the metal prism in the middle)
• The main spike is made from approx. 12mm square steel
• The beak is a max. about 29mm wide and about 5.5mm thick
• The beak has about 5cm off the point a cross section of about 17.5 x 4.9mm
• The upper steel fitting is about 20.5mm wide
• The end of the hammer has a cross section of about 39.7 x 39.8mm
• The metal rondel is about 2mm thick and has a diameter of about 89.2mm
• The shaft consists of rectangular wood of approx. 31.6 x 32.6mm
• Total weight approx. 2490 g

Made by Windlass Steelcrafts®

The materials used and the craftsmanship would allow the use this prop in re-enactment and theatrical combat shows. Since the manufacturer provides no service, this weapon is sold as a purely decorative item that is not designed for re-enactment or battle combats.