Scottish Cutlass

Scottish Cutlass

Please note: This is just an ornamental item, not intended for real use!

• Total length approx. 790mm
• Blade length approx. 630mm
• Length of the cross-guard approx. 218mm
• The basket is approx. 149mm wide
• Length of the grip (distance between guard and pommel) approx. 94mm
• The pommel is approx. 53mm long (without peen ring); and has a diameter of approx. 43.5mm
• The pommel is notched and the basket is secured in the notch
• The basket consists of approx. 0.8mm thick metal sheet
• The full-tang-blade is peened at the pommel-end
• Thickness of the striking / cutting edge approx. 0.9 mm
• Thickness from the back of the blade approx. 4.54mm
• About 237mm from the point is the blade widened, where it has a double-sided cut and there is approximately 54.3mm wide
• Blade width 10cm off the blade point approx. 44.5mm
• Thickness of the blade 10cm off the blade point approx. 4.3mm
• Width of the blade at the guard approx. 4 5.2mm
• Thickness of the blade at the guard approx. 4.5mm
• CoB (Center of Balance) approx. 9.0cm from the parry
• Weight without sheath approx. 1560 g
• Weight of the shell itself approx. 280 g

Even if this is a fully functional cutlass, it cannot be used in combat shows, historical reenactment or similar for safety reasons!

Specs may slightly vary from exemplar to exemplar.

Premium Quality, made by Windlass Steelcrafts®.