High boots Saxon

High boots Saxon

High boots Saxon are available in standard EUR sizes. If you select the size "made-to-measure", they will be manufactured according to this measurement chart. Please fill it in after you finish your order.

Is the boot shaft or instep loose or too tight?

If so, untie the knots on the button leather strings (a nail or a fork could help) and adjust their length adequately. If the shaft is too tight, make them longer. If the shaft is too loose, make them shorter.

Note to a selection of the shoe height:

You can set the total shoe height (measured from the ground) of this model high boots Saxon , so that it corresponds with the individual body height of the wearer. It is not advisable to choose a shoe height above 2” (5cm) below the kneecap. The maximum shoe height is usually about 19” (48cm).

Our footwear is made from genuine leather of three basic colours: black, dark brown and light brown (also described as tan colour). Any other colour has to be applied in form of special covering varnish that has one important drawback. Cracks of the varnished leather may appear after some time of use. The varnish on mechanically strained parts may even crumble away. Please consider this fact before placing your order, as we cannot provide a guarantee for the varnish for two years as usually. If you intend to use such shoes or boots just only once (e.g. for a wedding) or only several times a year, we assure you the shoes will serve you well and give you joy.

Care of the High boots Saxon

The shoes are treated with a balm containing beeswax. The shoes are made of genuine leather. You can treat them with various shoe care products. The balm softens the leather soft and waterproofs it. Moreover, it makes the leather darker. If you do not have the balm, you can also use oil for leather or a normal shoe polish. The shoe polish can easily tone the leather colour and cover minor imperfections (e.g. scuffed shoe tips).

Note on the size selection "made to measure": If you order tailor-made shoes from us and wear orthopaedic insoles, it is necessary to send them to us. The shoe manufacturer infixes the shoe inserts exactly and you can then look forward to the shoes fitting perfectly.