One-handed sword Oswulf, 15. cen., class B

One-handed sword Oswulf, 15th century, Europe

Sword class B

• Guard and Blade forged
• This sword is battle-ready, i.e. for practical use at reenactment.
• Total length approx. 990mm
• Blade length approx. 795mm
• Length of the cross guard approx. 215mm
• Width of the blade at the Guard approx. 41mm
• Thickness of the blade at the Guard approx. 5mm
• Width of the blade 10cm from the blade tip approx. 20,5mm
• Thickness of the blade 10cm from the blade tip approx. 3,4mm
• The point of balance (POB) is located approx. 7cm from the cross guard
• Weight approx. 1470 g
• Thickness of the striking edge approx. 2.5mm
• Blade from spring steel DIN 54SiCr6, oil quenched at approx. 53 HRC

Each sword is individually manufactured. That is why the above specifications can vary slightly from weapon to weapon.

Made in the Czech Republic.

The practical | battle-ready version of this sword has a blunt edge (2-3mm) and rounded point. Such sword was designed to be drawn in a battle or in a stage combat show.

Please note we cannot accept any responsibility for injury, damage or loss incurred by use of any of our sword. You use the sword entirely at your own risk! Even an unsharpened sword can cause serious injury and if precaution is not used easily break bone. Swords are not toys! Improper use and handling of accord may result in serious injuries or death to yourself or bystanders. Please keep your sword out of reach of children!

In fighting with sword on sword, the opponent’s blade should be parried with the side of the blade. Lead your sword sporty right and without excessive and/or unnecessary strength.

Compliance to local, state and federal laws and/or statutes is the responsibility of the purchaser.

Despite the high conscientiousness in the production and material selection, we cannot provide any warranty for breakage of the blade even at proper use. Any sword blade can be broken under certain circumstances. An absolute warranty cannot be provided by any respectable maker.

We warranty our swords against all manufacturer's defects (workmanship and or materials) for a period of two years. This warranty applies only when the product is used under normal conditions for which the sword is designed, and does not apply to damage related to accident, misuse, improper care, negligence, and abnormal and/or excessive wear and tear.

Possible nicks in the blade edge are natural symptom of wear and tear and cannot be reclaimed. When they turn up, please remove all sharp nicks by use of diamond file, abrasive paper or grinding machine.

Loosening of a cross | guard cannot be in many cases avoided as well. It can be fixed by additional riveting or tightening the screw joint. Winding a fishing line around the blade tang into the gap between the grip and guard prove as helpful as well to many swordmen, when trying to fasten a loosened guard.

Please read our Directions for the use of bladed weapons.